Mechanical, optical, and physicochemical properties of HPMC-based doxazosin mesylate orodispersible films

Abstract In this study, orodispersible films formed from hydroxypropyl methylcellulose (HPMC) E6 (2, 2.5, and 3%) and plasticizers ((glycerin (Gly), propylene glycol (PP), or polyethylene glycol (PEG)), containing doxazosin mesylate, were prepared by the solvent casting method and characterized. Design of experiments (DoE) was used as a statistical tool to facilitate the interpretation of the experimental data and allow the identification of optimal levels of factors for maximum formulation performance. Differential scanning calorimetry (DSC) curves and X-ray powder diffraction (XRPD) diffractograms showed doxazosin mesylate amorphization, probably due to complexation with the polymer (HPMC E6), and the glass transition temperature of the polymer was reduced by adding a plasticizer. Fourier transformed infrared (FTIR) spectroscopy results showed that the chemical structure of doxazosin mesylate was preserved when introduced into the polymer matrix, and the plasticizers, glycerin and PEG, affected the polymer matrix with high intensity. The addition of plasticizers increased the elongation at break and adhesiveness (Gly > PEG > PP), confirming the greater plasticizer effect of Gly observed in DSC and FTIR studies. Greater transparency was observed for the orodispersible films prepared using PP. The addition of citric acid as a pH modifier was fundamental for the release of doxazosin mesylate, and the desirability formulation had a release profile similar to that of the reference product

Efeitos do laser de baixa intensidade em osteoblastos cultivados em arcabouços nanofibrosos de ácido polilático / Effects of low-intensity laser on osteoblasts cultured on polylactic acid nanofibrous scaffolds

A engenharia de tecidos ósseos é um ramo importante da medicina regenerativa e envolve o desenvolvimento de arcabouços com composição e arquitetura favoráveis à integração celular, além do estudo de fatores capazes de promover a adesão e proliferação celular, incluindo estímulos químicos e biofísicos. O objetivo do estudo foi avaliar a utilização do laser de baixa intensidade (LBI) como uma ferramenta para promover a bioestimulação in vitro de células osteoblásticas cultivadas em arcabouços nanofibrosos de ácido polilático (PLA). Os arcabouços foram produzidos pela técnica de eletrofiação e caracterizados quanto à molhabilidade, composição pela espectroscopia no infravermelho por transformada de Fourier (FTIR), morfologia da superfície por microscópica eletrônica de varredura (MEV), caracterização termogravimétrica (TGA), calorimetria diferencial exploratória (DSC) e cristalinidade por difração de raios-X (DRX). Os ensaios biológicos foram conduzidos com osteoblastos da linhagem OFCOL II cultivados na superfície dos arcabouços e submetidos ou não (grupo controle) a irradiação com laser diodo InGaAIP na potência de 30 mW, nas doses de 1, 4 e 6 J/cm² e nos comprimentos de onda de 660 nm (grupos V1, V4, V6, respectivo as doses) e 780 nm (grupos I1, I4 e I6, respectivo as doses). Os efeitos do LBI na proliferação dos osteoblastos foram avaliados através do método bioquímico Alamar Blue, nos intervalos de 24, 48 e 72h, enquanto a viabilidade e a morfologia celular foram analisadas no intervalo de 72h, através do ensaio Live/Dead e da microscopia eletrônica de varredura (MEV), respectivamente. Os dados do ensaio bioquímico de Alamar Blue mostraram uma maior proliferação celular nos grupos V6 em todos os intervalos analíticos em comparação ao grupo controle (p<0,05). Outras diferenças entre o grupo controle e irradiados foram encontradas apenas nos intervalos de 48h e 72h para V1, e para o grupo IV6 em 72h. O ensaio Live/Dead revelou um aumento na viabilidade celular nos grupos trados com LBI, sendo significativamente maior no grupo V1 quando comparado ao grupo controle. A análise por MEV mostrou adequada interação dos osteoblastos aos arcabouços, com o corpo celular se espalhando ao longo do eixo da nanofibra e a presença de contatos físicos mais evidentes, através da formação de ligação por meio de filopódios e lamelipódios, nos grupos V1, V6 e I6. Em conjunto, os dados do presente trabalho mostraram que o LBI promove a bioestimulação de osteoblastos cultivados sobre nanofibras de PLA, o que aponta para o seu uso potencial nas técnicas de engenharia tecidual óssea, sobretudo no que se refere ao uso do comprimento de onda de 660 nm, a qual apresentou grupos com mais resultados significativos (AU).

Bone tissue engineering is a relevant branch of regenerative medicine and involves the development of scaffolds with composition and architecture favorable to cell integration, in addition to studying factors capable of promoting cell adhesion and proliferation, including chemical and biophysical stimuli. The study aimed to evaluate the use of low-level laser irradiation (LLLI) to promote in vitro biostimulation of osteoblastic cells cultured on polylactic acid (PLA) nanofibrous scaffolds. The scaffolds were produced by the electrospinning technique and characterized in terms of wettability, composition by Fourier transform infrared spectroscopy (FTIR), surface morphology by scanning electron microscopy (SEM), thermogravimetric characterization (TGA), differential scanning calorimetry (DSC) and crystallinity by Xray diffraction (XRD). The biological assays were conducted with osteoblasts of the OFCOL II lineage cultured on the surface of the scaffolds and submitted or not (control group) to irradiation with InGaAIP diode laser, power of 30 mW, with doses of 1, 4 and 6 J/cm² and wavelengths of 660 nm (groups V1, V4, V6, respectively doses) and 780 nm (groups I1, I4 and I6, respectively doses). The effects of LLLT from the perspective of osteoblasts were evaluated using the biochemical method Alamar Blue assay, at intervals of 24, 48 and 72h, while cell viability and morphology were observed at 72h, using the Live/Dead assay and electron microscopy. scan (SEM), respectively. The Alamar Blue assay data showed more significant cell proliferation in groups in the V6 groups at all analytical intervals compared to the control group (p<0.05). Other differences between the control and irradiated groups were found only at intervals of 48h and 72h for V1, and for group IV6 at 72h. The Live/Dead assay revealed an increase in cell viability in the groups treated with LLLT, being significantly higher in the V1 group when compared to the control group. SEM analysis showed adequate interaction between osteoblasts and scaffolds, with the cell body spreading along the nanofiber axis and the presence of more evident physical contacts, through the formation of bonds through filopodia and lamellipodia, in groups V1, V6 and I6. Together, the data from the present study observed that LLLT promotes the biostimulation of osteoblasts cultured on PLA nanofibers, which pointed to its potential use in bone tissue engineering techniques, especially with regard to the use of the wavelength of 660 nm, which presented groups with more significant results (AU).

Formulation and Optimization of Diclofenac Sodium Loaded Ethylcellulose Nanoparticles

Abstract Design of experiment (DoE) is a useful time and cost-effective tool for analyzing the effect of independent variables on the formulation characteristics. The aim of this study is to evaluate the effect of the process variables on the characteristics involved in the preparation of Diclofenac Sodium (DC) loaded ethylcellulose (EC) nanoparticles (NP) using Central Composite Design (CCD). NP were prepared by W/O/W emulsion solvent evaporation method. Three factors were investigated (DC/EC mass ratio, PVA concentration, homogenization speed) in order to optimize the entrapment efficiency (EE) and the particle size of NP. The optimal formulation was characterized by Fourier Transform Infrared (FTIR), Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), and in vitro release. Optimized formulation showed an EE of 49.09 % and an average particle size of 226.83 nm with a polydispersity index of 0.271. No drug-polymer interaction was observed in FTIR and DSC analysis. SEM images showed that the particles are spherical and uniform. The in vitro release study showed a sustained release nature, 53.98 % of the encapsulated drug has been released over 24hours period. This study demonstrated that statistical experimental design methodology can optimize the formulation and the process variables to achieve favorable responses.

Characteristics of Starch Extracted from the Stem of Pineapple Plant (Ananas comosus) - an Agro Waste from Pineapple Farms

Abstract The present study focused on the use of pineapple plant stem, which is an agro-waste, for the production of starch (11.08 % ± 0.77). Characters were studied using X-ray diffraction, nuclear magnetic resonance spectroscopy (NMR), fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and rheological methods. The granular size of stem starch was comparatively smaller than corn starch granules. The X-ray diffraction data revealed that stem starch has an A-type crystal structure. The molecular structure was similar to those obtained for native starches, which is confirmed by NMR and FTIR. The gelatinization temperature was observed to be higher than corn starch and rheological studies revealed; stem starch is more viscous than corn starch. The purity analysis showed that the harmful heavy metals were in negligible quantity and the tested pesticides were absent. This could make this a good source of starch for food industries. Results revealed that this agro-waste has a high potential for the production of good quality starch.